CMC-F Non Contact
Menu

CMC-F Coded Magnetic Non Contact

 

IDEM Safety SwitchesThe IDEM CMC-F hygiecode coded no contact switch has been specifically designed for food processing applications. It has a stainless steel 316 mirror polish finish and is suitable for food contact zones (EHEDG guidelines) and CIP SIP cleaning as the mounting holes are at the rear with no food traps.

This IDEM CMC-F has a housing specified to 105C but has been designed to work up to 125C and will operate with most safety relays. It has slim fixing for fittings in narrow channels, a wide 14mm sending high tolerance to misalignment and 14mm switching tolerance. It can be high pressured hosed at high temperature from the IP69K, LED indications and coded magnetic actuation.

The IDEM CMC-F has a quick M12 version which is fitted with a 250mm (10”) cable and one switch connected in series to an SCR-2 or SCR-3 to give dual channel monitoring with manual start.

 

CMC-F Non Contact Main Features


Standards EN1088 IEC 60947-5-3 EN 60204-1 ISO 13849-1 EN62061 EN 954-1 UL 508
Safety classification and reliability data
Switching reliability 3.3 x 106 operations at 100mA load
EN 954-1 Up to category 4 with safety relay
ISO 13849-1 Up to PLe depending upon system architecture
EN 62061 Up to SIL3 depending upon system architecture
Safety data - Annual usual 8 cycles per hour / 24 hours a day / 365 days
PFHd 2.52 x 10-8
Proof test interval (life) 47 Years
MTTFd 470 Years
Safety Channel 1 NC 24V.dc 0.2A Max. rating
Safety channel 2 NC 24V.dc 0.2A Max. rating
Safety channel 3 NO 24V.dc 0.2A Max. rating
Minimum switched current 10V.dc 1mA
Dielectric withstand 250V.ac
Insulation Resistance 100 Mohms
Recommended setting gap 5mm
Switching distance Sao 10mm close
Target to target Sar 20mm open
Tolerance to misalignment 5mm in any direction from 5mm setting gap
Switching frequency 1.0Hz minimum
Approach speed 200mm/m to 1000mm/s
Body material Stainless steel 316 Mirror polished finish (Ra4)
Temperature Range -25 + 105C
Enclosure Protection IP69K IP67
Shock resistance IEC 68-2-27 11ms 30g
Vibration resistance IEC 68-2-6 10-55 Hz 1mm
Cable type PVC 6 or 8 core 6mm O.D
Mounting bolts 2 x M4 Tightening torque 1.0 Nm
Mounting position Any

For more information about IDEM CMC-F-F coded non contact HYGIDECODE Switches, contact More Control on 0345 00 00 400.

Office Address 

21 Drakes Mews
Crownhill Industrial Estate
Milton Keynes
MK8 0ER

Tel: 0345 00 00 400

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Search Website